Scanning
Scan to Desktop
Before you begin:
• Before scanning, ensure that your computer and the printer are plugged in, powered on, and
connected to an active network.
• On your computer, ensure that you have the correct print driver software installed. For details, refer
to Installing the Software on page 60.
• On your computer, ensure that the printer is installed using WSD. For details, refer to Installing the
Printer as a Web Service on Devices on page 66.
• On your printer, ensure that WSD is enabled. For details, refer to Enabling WSD Scan Services on
page 263.
To Scan to Desktop:
1. Load the original document on the document glass or into the duplex automatic document feeder.
2. At the printer control panel, press the Home button.
3. Touch Scan to Desktop.
4. To select a destination, touch the computer address.
5. To begin the scan, press Scan.
The Windows Fax and Scan application opens on your PC desktop. The image file of your scan is
saved to the Scanned Documents folder.
6. If you are scanning from the document glass, when prompted, to finish, touch Done, or to scan
another page, touch Add Page.
Note: If you are scanning a document from the automatic document feeder, a prompt does not
appear.
7. To return to the Home screen, press the Home button.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 135
User Guide
To Next Page
Loading...
Need help?
General
