Xerox WorkCentre 6515 User Manual

System Administrator Functions
Configuring an LDAP Authentication System
Before using LDAP servers for authentication, configure the settings in the Embedded Web Server.
To configure an LDAP system:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 265.
3. Click Permissions, then click Login/Logout Settings.
4. For Network, click Edit.
5. In Network Login, select LDAP, then click Next.
6. In LDAP, click each of the topics in the list. In each window, perform the required configuration, then
click OK.
7. When the LDAP configuration is finished, click Done.
Configuring an SMB Authentication System
Before using servers for authentication, configure the settings in the Embedded Web Server.
To configure an SMB authentication system:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 265.
3. Click Permissions, then click Login/Logout Settings.
4. For Network, click Edit.
5. In Network Login, select SMB (Windows ADS), then click Next.
6. In SMB (Windows ADS), type the configuration information for the default server and any alternate
servers, then click Done.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 271
User Guide

Xerox WorkCentre 6515 Specifications

General

Brand	Xerox
Model	WorkCentre 6515
Category	All in One Printer
Language	English