Xerox WorkCentre 6515 User Manual

Installation and Setup
Connecting to a Telephone Line
WARNING: To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger
telecommunication line cord.
1. Ensure that the printer is powered off.
2. Connect a standard RJ11 cable, No. 26 American Wire Gauge (AWG) or larger, to the Line port on
the back of the printer.
3. Connect the other end of the RJ11 cable to an operating telephone line.
4. Power on the printer.
5. Enable and configure the Fax functions.
For reference:
Configuring Fax Defaults and Settings on page 161.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 51
User Guide

Xerox WorkCentre 6515 Specifications

General

Brand	Xerox
Model	WorkCentre 6515
Category	All in One Printer
Language	English