Xerox WorkCentre 7800 series User Manual

Troubleshooting
266 WorkCentre 7800 Series Multifunction Printer
User Guide
Problems Receiving Faxes
Symptoms Probable Causes Solutions
The fax received by the recipient
is blank.
There is a problem with the telephone
connection or with the fax machine of
the sender.
Verify that the printer can make clean
copies. If it can, have the sender fax
the document again.
The sender loaded the pages
incorrectly.
Contact the sender.
The printer answers the call but
does not print the fax.
The memory is full. To increase available memory, delete
stored jobs and wait for the existing
jobs to complete.
The received fax size is reduced
in size.
The paper supply in the printer does
not match the document size sent.
Confirm the original size of the
documents, then load the appropriate
paper size in the printer.
Faxes are not received
automatically.
The printer is set to receive faxes
manually.
Set the printer to receive faxes
automatically.
The memory is full.
If the printer is out of paper, faxes and
print jobs can deplete the printer of
memory. Load paper and print the jobs
stored in the memory.
The telephone line is connected
incorrectly.
Verify the telephone line connection. If
the telephone line is disconnected,
connect it.
There is a problem with the fax
machine of the sender.
Make a copy to verify that the printer
can make clean copies and prints. If
the copy prints correctly, have the
recipient verify that their fax machine
is operating correctly.
If the problem persists, for online support information, go to www.xerox.com/office/WC780Xsupport.

Xerox WorkCentre 7800 series Specifications

General

Brand	Xerox
Model	WorkCentre 7800 series
Category	All in One Printer
Language	English