G
ENERAL
F
AX
F
UNCTIONS
2.2
Sending a Fax
Preparing Documents for Faxing
Use the following guidelines to prepare your documents for
faxing:
• Do not load documents smaller than 142 x 148 mm or larger
than 216 x 356 mm in the Automatic Document Feeder
(ADF).
• Do not attempt to load the following types of documents into
the ADF:
- carbon-paper or carbon-backed paper
- coated paper
- onion skin or thin paper
- wrinkled or creased paper
- curled or rolled paper
- torn paper
•Remove all staples and paper clips before loading documents
in the ADF.
• Make sure any glue, ink or correction fluid on the paper is
completely dry before loading documents in the ADF.
• Do not load documents containing different sizes or weights
of paper in the ADF.
• If you want to make copies from booklets, pamphlets,
transparencies or documents having other unusual
characteristics, use the document glass to load the
document.
Loading an Original Document
To fax a document using the Automatic
Document Feeder (ADF):
1
Slide the document face up into the ADF. You can insert up
to 30 sheets at a time.
To Next Page
Loading...
Need help?
General
