P
RINTING
5.20
Setting Graphic Properties
Use the following graphic options to adjust the print quality for
your specific printing needs. See page 5.2 for more information
about accessing printer properties.
Click the Graphics tab to display the properties shown below.
Property Description
Resolution
You can select the printing resolution by
choosing from 600 dpi (Normal) or
300 dpi (Draft). The higher the setting,
the sharper the clarity of printed
characters and graphics. Higher settings
may increase time it takes to print a
document.
Toner Save
Selecting this option extends the life of your
toner cartridge and reduces your cost per
page without a significant reduction in the
print quality.
•
Printer Setting
: When you select this
option, the Toner Save feature is
determined by the setting you’ve made on
the control panel of the printer.
•
On
: Select this option to allow the printer
to use less toner on each page.
•
Off
: When you do not need to save toner
to print a document, select this option.
1
3
2
1
2
To Next Page
Loading...
Need help?
General
