O
THER
W
AYS
TO
F
AX
4.3
4
5
Press Enter to confirm the number. The display asks you to
enter another fax number to send the document.
NOTE:
Your machine can send one broadcasting fax to multiple
destinations. The “Enter Number” prompt does not appear if a
broadcast is set up and not completed. You must wait until the
current broadcast is completed.
6
If you want to enter more fax numbers, repeat steps 4 and
5. You can add up to 10 destinations.
Note that you cannot use group dial numbers for another
fax number.
7
When you finish entering fax numbers, press Start Copy/
Fax.
The document is scanned into the memory before
transmission. The display shows the memory capacity and
the number of pages being stored in the memory.
For the document loaded on the document glass, the
display asks if you want to load another page. Select
“1.Yes” to add. Otherwise, select “2.No.”
8
The machine begins sending the document in order of the
numbers you entered.
Sending a Delayed Fax
You can set your machine to send a fax at a later time when you
will not be present.
1
Load the document(s) face up into the ADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see page 2.2.
2
Adjust the document resolution to suit your fax needs (see
page 2.4).
If you need to change the contrast, see page 1.13.
To Next Page
Loading...
Need help?
General
