A
UTOMATIC
D
IALLING
3.2
Speed Dialling
You can store up to 100 frequently dialed numbers in one or
two-digit speed dial locations (0-99).
Storing a Number for Speed Dialling
1
Press Phonebook on the control panel.
2
Press Phonebook or the scroll button (
¦
or
) to display
“Store/Edit” on the bottom line of the display. Press Enter.
3
Press Enter when “Speed Dials” appears on the display.
4
Enter a one or two-digit speed dial number between 0 and
99, using the number keypad and press Enter.
If a number is already stored in the location you chose, the
display shows the number to allow you to change it. To start
over with another speed-dial number, press Upper Level.
5
Enter the number you want to store using the number
keypad and press Enter.
To insert a pause between numbers, press Redial/Pause
and a “-” appears on the display.
6
To assign a name to the number, enter the name. For
details about how to enter names, see “Entering Characters
Using the Number Keypad” on page 1.5.
OR
If you do not want to assign a name, skip this step.
7
Press Enter when the name appears correctly or without
entering a name.
8
To store more fax numbers, repeat steps 4 through 7.
OR
To return to Standby Mode, press Upper Level or Stop/
Clear.
To Next Page
Loading...
Need help?
General
