YL Instruments YL9100 HPLC User Manual

YL9120 UV/Vis Detector
Diagnosis : To Inspect hardware condition of the YL9120.
Y
L9120
Autozero : To change the absorbance to Zero “0”
Reset : To release the UV/Vis detector status from the error.
[Status message]
Initializing : It is displayed during initialization.
Ready : It is displayed when the pump is ready.
Run : It is displayed during analysis.
Fault : It is displayed if there is error on the pump.
Diagnosis : It is displayed during self test.
3-1-3. Method Setup
11

YL Instruments YL9100 HPLC Specifications

General

Brand	YL Instruments
Model	YL9100 HPLC
Category	Laboratory Equipment
Language	English