YL9130 Column Compartment
Chapter 1. Introduction
YL9130 column compartment is a thermostat to control column temperature of HPLC system. YL9130
column compartment uses RTD sensor to read temperature and PID control to control peltier device, it
provides wide temperature range and excellent temperature accuracy. The followings are standard
specification of YL9130 column compartment.
1-1. Specifications
1) Temperature range : 4°C (Cooling) - 90 °C
2) Temperature stability : ±0.05°C
3) Temperature accuracy : ±0.5°C
4) Temperature precision : ±0.1°C
5) Temperature programs : 40 Steps
6) Column capacity : Total 4 columns (max. 4ea of 300mm columns)
7) Column switching : One automatically 6-port valve ( optional )
8) Heat-up time : 16 minutes from 4°C to 90°C
9) Cool-down time : 13 minutes from 90°C to 4°C
10) Preheat : 200mm heat exchanger, OD 1/16 inch
L9130
11) External input : Start, Ready
12) External output : Start, Ready Mark out
13) Communications : LAN
14) Safety & maintenance : Leak detection, Diagnostics, Error detection
15) Dimensions : 385 X 160 X 565mm (width X height X depth)
16) Line Voltage : 110 or 220 VAC, ±10%
17) Line frequency : 50/60Hz, ±5%
18) Power consumption : 150W
1
To Next Page
Loading...
Need help?
General