YOKOGAWA Daqstation DX2020 User Manual

6-19
IM 04L42B01-01E
Saving and Loading Data
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
6.8 LoadingandDisplayingtheMeasuredDatain
theStorageMedium
Load the display or event data file saved on the external storage medium and display the
waveform. The loaded data is shown on the historical trend display.
For the operations on the historical trend display, see section 4.3.
Procedure
• LoadingaFile
1.
Carry out the procedure below to show the display.
Press MENU (to switch to setting mode), and select the File tab > Loaddisplay
data or Loadeventdata. Press the CF or USB soft key*; and press DISP/
ENTER.
* When a CF card and a USB flash memory (/USB1 option) are being used.
2.
Press the arrowkeys to select a directory, and press DISP/ENTER. The files in
the directory are displayed. The root directory is denoted by [/].
3.
Press the arrowkeys to select a file, and press DISP/ENTER.
The file is loaded, and the waveform is displayed in the historical trend.
Note
• Asshowninthetablebelow,thedisplaydataandeventdatafilenameextensionschange
depending on whether or not the /AS1 advanced security option is installed.
AdvancedSecurity DisplayDataFiles EventDataFiles
Not installed .DAD .DAE
Installed .DSD .DSE
• FordetailsonhowtousetheSortkey,seesection6.7.

YOKOGAWA Daqstation DX2020 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2020
Category	Recording Equipment
Language	English