YOKOGAWA Daqstation DX2020 User Manual

2-2
IM 04L42B01-01E
2.2 SettingtheTimeDifferencefromGMT
Set the time zone of the region in which the DX will be used. Make sure to set this value
if you are using the Internet network functions or the DST function.
SetupScreen
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode), and select the Menu tab > Timesettings.
SetupItems
• Date&Time>Timezone
Set the time zone of the region in which the DX will be used in terms of the time
difference from GMT. Specify a value in the range of –1300 to 1300 (where the first
two digits denote the hour and the last two digits denote the minute). A negative value
indicates that the local time is behind the GMT.
Example: The standard time in Japan is ahead of the GMT by 9 hours. In this case,
enter “900.”

YOKOGAWA Daqstation DX2020 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2020
Category	Recording Equipment
Language	English