5.7 Adding Options to the DL350
This section explains how to add options after you have purchased the DL350.
You can use this additional option license feature on DL350s with firmware version 1.10 and later.
For details, see the user’s manual supplied with the additional option license.
License Key
Tell the following information to your YOKOGAWA dealer, and purchase additional option licenses.
• Serial number of the instrument
• Suffix codes of the options you want to add
The license key is written on the Product Information sheet of the option license.
Adding an Option
1.
On the waveform screen, tap MENU > Utility > System. The system screen appears.
2.
Tap Others tab.
3.
Tap Enter License Key under Option Installation to display a keyboard.
Enter the license key.
→ See the user’s manual (IM 709830-01EN)
supplied with the additional option license.
Restarting
Restart the DL350 The additional option will be activated.
Viewing the System Information
To verify that the option has been installed, view the system information on the DL350 overview
screen. For instructions on how to display the overview screen, see section 5.6.
Note
The SUFFIX (suffix code) inscribed in the name plate on the DL350 case indicates the installed options at
the time of factory shipment. After you add options through additional option licenses, check the options on
the DL350 overview screen.
To Next Page
Loading...
Need help?
General
