YOKOGAWA DL350 Getting Started Guide

6-41
IM DL35 O -03EN
Specifications
1
2
3
4
5
6
App
Index
CAN & LIN Bus Monitor Module (720241)
Item Specifications
Standard operating conditions Ambient temperature: 23 to 5°C
Ambient humidity: 20 to 80% RH
Number of input ports CAN port: 1. LIN port: 1.
Maximum sample rate 100 kS/s
Input format Isolated unbalanced
CAN port
Item Specifications
Maximum input voltage −3 V to +10 V (between CAN_H and GND or CAN_L and GND)
Maximum rated voltage to ground
Between input and case
Between inputs
42 V (DC + ACpeak) (CAT II, 30 Vrms)
Input connector D-sub 9 pin (male)
Terminator Internal. Can be enabled or disabled for each port
Terminator resistance
(when the terminator is enabled)
110 to 130 Ω
LED display Illuminates to indicate that the terminator is enabled
Supported protocols Physical layer: ISO-11898 (High Speed Communication)
Supported bit rates
1
10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 66.7 kbps, 83.3 kbps, 100 kbps,
125 kbps, 250 kbps, 500 kbps, 800 kbps, 1Mbps
Supported data length 4 bytes maximum
Number of sub channels 60 sub channels
One shot output Frames can be output in single shots.
A/D converter resolution (when Value Type is set to Float)
16 bits, 2400 LSB/div
1 Low-speed CAN at low-speed transceiver levels is not supported.
LIN port
Item Specifications
Maximum input voltage −0.3 V to +18 V (between LIN.VBAT and GND)
Maximum rated voltage to ground
Between input and case
Between inputs
30 Vrms (CAT II)
Input connector D-sub 9 pin (male)
Supported protocols Physical layer: Complies with ISO9141
Supported bit rates 2400 bps, 9600 bps, 19200 bps
Supported data length 4 bytes maximum
Number of sub channels 60 sub channels
Supported check sums Standard check sum, extended check sum
6.13 Module Specifications

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English