Zebra RFD8500 User Manual

Chapter 7 123SCAN2
Introduction
123Scan² is an easy-to-use, PC-based software tool that enables the quick and easy setup of Zebra scanners,
and the RFD8500 reader.
123Scan² uses a wizard tool to guide users through a streamlined set up process. Once parameters are set,
the values are saved to a configuration file that can be distributed via e-mail, electronically downloaded via a
USB cable. 123Scan² can generate multiple reports that can be easily re-branded using Microsoft Word or
Access. Report options include programmed parameters, and asset tracking information.
Additionally, 123Scan² can upgrade RFD8500 firmware, automatically check online to enable support for newly
released products, and stage scanners simultaneously via USB hub(s).
Communication with 123Scan
2
To communicate with the 123Scan² program which runs on a host computer running a Windows XP SP2,
Windows 7, and Windows 8 operating system, use a USB cable to connect the device to the host computer.

Zebra RFD8500 Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D/2D
Read rate (max)	600 reads/s
Bluetooth version	2.1+EDR
Operating frequency	865 - 868 MHz
Standard interfaces	Bluetooth
Product color	Gray
LED indicators	Yes
Protection features	Dust resistant, Splash proof
Battery capacity	4410 mAh
Power source type	Battery
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	5 - 85 %
Mobile operating systems supported	Android 4.4, Android 5.0, Android 5.1, iOS 8.0, iOS 8.2, iOS 9.0
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	130 mm
Width	185 mm
Height	80 mm
Weight	430 g