Zebra RFD8500 User Manual

1 - 10 RFD8500 User Guide
Charging
Charging the Battery in the Reader
Before using the RFD8500 for the first time, charge the battery until the LED Power/Charging Indicator turns
solid green (see LED and Beeper Indicators on page 2-3 for charge status indications). To charge the
RFD8500, use the Micro USB cable, cup charger, or cradle.
Figure 1-12 Charging Accessories
The Three Slot Charge Only cradle can be used to charge any combination of devices including the RFD8500,
TC55, and a dual battery charger.
Figure 1-13 Charging Devices
CAUTION Ensure that you follow the guidelines for battery safety described in Battery Management on page
1-11.

Zebra RFD8500 Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D/2D
Read rate (max)	600 reads/s
Bluetooth version	2.1+EDR
Operating frequency	865 - 868 MHz
Standard interfaces	Bluetooth
Product color	Gray
LED indicators	Yes
Protection features	Dust resistant, Splash proof
Battery capacity	4410 mAh
Power source type	Battery
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	5 - 85 %
Mobile operating systems supported	Android 4.4, Android 5.0, Android 5.1, iOS 8.0, iOS 8.2, iOS 9.0
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	130 mm
Width	185 mm
Height	80 mm
Weight	430 g