Zebra ZXP 1 Series User Manual

116 Zebra ZXP Series 1 Card Printer Service Manual P1061942-001
5: Replacement Procedures
Procedures
5.6.4 Right Side Cover
Step 1. Locate the two screws (circled below) that hold the Right Side Cover in place.
Step 2. With a TORX T10 driver, loosen the two screws (9.0 in-lb).
Step 3. Remove the Right Side Cover.
NOTE • This procedure uses Spare Kit # P1031925-143: KIT, SIDE PANELS BEZELS.

Zebra ZXP 1 Series Specifications

General

Brand	Zebra
Model	ZXP 1 Series
Category	Printer
Language	English