2: Installation and Setup
Changing the Printer Driver Options
P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 47
Device Settings Tab
The Device Settings tab provides device information, security status, and printer usage.
To access the Device Settings tab, select Start > Devices and Printers. Right click on the
Zebra ZXP Card Printer listing. Select Printer properties > Device Settings.
Device Information
•Model: Specifies the printer model number.
•Fw Version: Specifies the installed firmware version.
• Serial Number: Specifies the printer serial number.
• Ribbon Type: Specifies the ribbon installed in the printer.
• Head resistance: Specifies the printhead resistance value.
• Mag Encoder: Specifies if this option is present.
•Panels: Shows the total number of panels printed for the lifetime of the printer.
• Remaining Count: Shows the remaining card count for the ribbon installed. For
monochrome ribbons, this will display Unknown.
Click on the Save/Restore button to save your printer and/or driver settings. You can later
restore those saved settings; see Page 48 for details.
Click on the Tools button to access a dialog box that allows you to test and communicate with
the printer; see Page 49 for details.
To Next Page
Loading...
Need help?
General
