2: Installation and Setup
Installing the Ribbon Cartridge
P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 69
2.1 Installing the Ribbon Cartridge
The ZXP Series 1 Printer requires genuine Zebra ZXP Series 1 True Colours
®
ix Series
Ribbons.
These high-performance Resin Thermal Transfer and Dye Sublimation ribbons are
specifically designed for the ZXP Series 1 Printer.
• Each ribbon cartridge includes an integrated adhesive cleaning roller assembly that is
used to clean the cards entering the printer. Improper cleaning will reduce printer life
and degrade print quality
• When the ribbon is completely used, change the cartridge assembly.
Step 1. Open printer lid by pressing the Cover Release button on the top of your printer.
Step 2. Peel protective wrapper from the adhesive cleaning roller by gently pulling on the
tape. Discard the protective wrapper.
Electrostatic Discharge Caution • DO NOT TOUCH the printhead or the electronic
components on the printhead. Discharge of electrostatic charge from the human body or other
surfaces can damage the printhead or other electronic components
To Next Page
Loading...
Need help?
General
