Zebra ZXP 1 Series User Manual

5: Replacement Procedures
Procedures
P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 127
5.6.14 Main PCBA
Step 1. Print a Standard Test Card (see Section 2.3). This card will provide you with the
Head Resistance, the X and Y Offsets, and the End of Text value to update the
firmware on the replacement Main
PCBA.
Step 2. With the Bottom Cover removed, the Main
PCBA is visible and accessible.
Step 3. Remove the ground wires from the tabs (circled below) on the Ground Plate.
NOTE • This procedure uses Spare Kit # P1031925-007: KIT, MLB SINGLE SIDED.

Zebra ZXP 1 Series Specifications

General

Brand	Zebra
Model	ZXP 1 Series
Category	Printer
Language	English