1: General Description
Specifications
P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 7
Encoding Options and Specifications
• Magnetic stripe encoder – ISO 7811 (new and re-encoded; tracks 1, 2, and 3; high
and low coercivity; stripe down; 30 mil card only; factory install only)
Optional Features
• CardSense™ Single-Card Feed Roller Kit - optional, field upgradable
• ZebraCare™ extended product warranty programs
Communications Interfaces
• USB V2.0 (cable included) - standard
• Built-in 10/100 Ethernet - optional, field upgradable
Card Compatibility
NOTE: For optimum print quality and printer performance, use of Zebra genuine
supplies is recommended.
• Card Thickness: 10-40 mil
• Card Size: CR-80, ISO 7810 format, Type ID-1, 2.12" (54 mm) x 3.38" (86 mm)
• Card Material: PVC and PVC composite
• Spot Color or monochrome print only on less than 20 mil or greater than 35 mil
card thickness
Physical Specifications (standard model)
Electrical Specifications
• Auto-switching single-phase AC power
• Operating range: 90-132VAC and 190-264VAC RMS
• Frequency range: 47-63 Hz
• Power requirement is 100W max continuous and 607W peak (for 450 µ
sec)
output power
• FCC Class A
Printer
Height 9.3" (236 mm)
Width 7.9" (200 mm)
Depth 13.0" (330 mm)
Weight 11.6 lbs (5.3 kg)