Zebra ZXP 1 Series User Manual

138 Zebra ZXP Series 1 Card Printer Service Manual P1061942-001
5: Replacement Procedures
Procedures
Step 3. With a TORX T10 driver, remove the four screws (SCR, PLAST, 4-.37L, 9.0 lb),
two on each side, holding the Flipper Module to the Frame; circled below.
Step 4. Cut the cable ties holding the various cables and connectors.
Step 5. Remove the Flipper Module.

Zebra ZXP 1 Series Specifications

General

Brand	Zebra
Model	ZXP 1 Series
Category	Printer
Language	English