6: Preventive Maintenance
Cleaning the System
P1061942-001 Zebra ZXP Series 1 Card Printer Service Manual 187
Step 5. When the presence of the cleaning card is sensed, the rollers will take the card into
the printer; and the cleaning process will begin.
Step 6. When the cleaning process is completed, the printer will eject the cleaning card.
Step 7. The message
INSERT FEEDER CLEANING CARD will display. Open the feeder
cover, and insert the feeder cleaning card.
Step 8. When the feeder cleaning card has been sensed by the feeder card sensor, the
message
CLOSE COVER will display. Close the feeder cover.
Step 9. When feeder cleaning is complete, the message
REMOVE FEEDER CLEANING
CARD
will display. Open the feeder cover, remove the cleaning card, and
close the feeder cover.
Step 10. After the cleaning card is removed and the feeder cover is closed, the LCD will
display
CLEANING DONE.
Step 11. You may now reload the ribbon and cards and continue printing.
To Next Page
Loading...
Need help?
General
