Operation Manual / 4 Product description / A130-H.. - A140-H
8 Dismantling and fitting / 8.7 Pressing off the casing
© Copyright 2017 ABB. All rights reserved. HZTL4030_EN Revision D May 2017
8.7 Pressing off the casing
CAUTION
Axial force of the press-off tool
Using the press-off tool (90042), a high level of axial force can be generated.
If the casing is pressed off with too much force on one side, the rotor can be
damaged.
u Use the tool on both sides in alternation and make sure not to press off
too hard on either side.
Fig.32: Press off the casing
Page 66 / 91
To Next Page
Loading...
Need help?
General
