ABB ACS850 User Manual

Application macros 99
Default parameter settings for Sequential control macro
Below is a listing of default parameter values that differ from those listed in chapter
Additional parameter data (page 263).
Parameter
Sequential control
macro default
No. Name
10.01 Ext1 start func In1St In2Dir
10.03 Ext1 start in2 DI2
10.10 Fault reset sel C.FALSE
11.03 Stop mode Ramp
13.05 AI1 min scale 0.000
22.01 Acc/Dec sel DI3
26.01 Const speed func 0b01
26.02 Const speed sel1 DI4
26.03 Const speed sel2 DI5
26.04 Const speed sel3 DI6
26.06 Const speed1 300 rpm
26.07 Const speed2 600 rpm
26.08 Const speed3 900 rpm
26.09 Const speed4 1200 rpm
26.10 Const speed5 1500 rpm
26.11 Const speed6 2400 rpm
26.12 Const speed7 3000 rpm

ABB ACS850 Specifications

General

Safety	STO (Safe Torque Off)
Communication	CANopen
Enclosure	IP21
Output Voltage	Up to 1000 V DC
Protection Features	Overcurrent, Overvoltage, Undervoltage
Cooling Method	Air or liquid cooling
Input Voltage	380 to 690 V AC