ABB ACS880 Series Quick Start Up Guide

Adding ABB drives to PROFINET
1. Follow steps 1 and 2 of Adding ABB drives to PROFIBUS DP line.
2. From the hardware catalog pane, drag and drop the required PROFINET ABB Drive to the PLC.
Figure 125 FENA drive
3. In the ABB drive, connect PLC to the PROFINET interface.
Figure 126 Connecting PLC and FENA drive

ABB ACS880 Series Specifications

General

Cooling Method	Air-cooled, liquid-cooled
Enclosure class	IP21, IP55
Mounting type	Wall-mounted
Control method	Direct torque control (DTC)
Braking chopper	Integrated or external
Communication	Ethernet
Protection Features	Overcurrent, overvoltage, undervoltage, overload, short circuit, overtemperature, earth fault
Operating Temperature Range	-15°C to +50°C
Storage Temperature Range	-40°C to +70°C
Relative Humidity	5 ... 95 % (non-condensing)
Safety features	Safe torque off (STO)