1 Safety
1.2.3.8. Translate the information on safety and information labels
3HAC026048-001 Revision: A28
© Copyright 2006-2008 ABB. All rights reserved.
1.2.3.8. Translate the information on safety and information labels
Labels on the product
Both the robot and the controller are marked with several safety and information labels,
containing important information about the product. The information is useful for all
personnel handling the robot system, eg. during installation, service or operation.
The labels are identified and located on the product as shown in section:
• Inspection of information labels on page 78
Translation possibilities
The labels fitted to the product contain space for adding a fourth language underneath the
three standard languages (English, German and French).
Add a local language to the label by:
• using a transparent sticker over the standard label with text added in a fourth language.
Drawings detailing the design (text, figure, dimensions) of the standard labels can be
ordered from ABB. Notice that each label is identified according to the article number
located in the lower corner of the label.
Example of transparent sticker
The figure below shows the location of the free space on one of the labels on the robot, where
the fourth language can be added. The figure also shows a transparent sticker, containing the
text in Swedish.
xx0500002517
A Free space for adding a fourth language
To Next Page
Loading...
Need help?
General