4 Repair
4.1. Introduction
853HAC026048-001 Revision: A
© Copyright 2006-2008 ABB. All rights reserved.
4 Repair
4.1. Introduction
Structure of this chapter
This chapter details all repair activities recommended for the robot and any external units of
the robot.
It is made up of separate procedures, each detailing a specific repair activity. Each procedure
contains all information required to perform the activity, e.g. spare parts numbers, required
special tools and materials.
The procedures are gathered in sections, divided according to the component location on the
robot.
Required equipment
All equipment required to perform a specific repair activity is listed together with the current
procedure.
The equipment is also gathered in different lists in the Product manual, reference information.
Safety information
Before any service work is commenced, it is extremely important that all safety information
is observed!
There are general safety aspects that must be read through, as well as more specific safety
information that describe danger and safety risks when performing specific steps in a
procedure. Make sure to read through the chapter Safety on page 13 before commencing any
service work.
To Next Page
Need help?
General