3.2 Maintenance schedule and expected component life
3.2.1 Specification of maintenance intervals
Introduction
The intervals are specified in different ways depending on the type of maintenance
activity to be carried out and the working conditions of the IRB 460:
• Calendar time: specified in months regardless of whether the system is
running or not.
• Operating time: specified in operating hours. More frequent running means
more frequent maintenance activities.
• SIS: specified by the robot's SIS (Service Information System). A typical
value is given for a typical work cycle, but the value will differ depending on
how hard each part is run. The SIS used in M2004 is further described in the
Operating manual - Service Information System.
Overhaul
Depending on application and operational environment a complete overhaul may
be necessary in average around 40000 hours.
ABB Connected Services and its Assessment tools can help you to identify the
real stress level of your robot, and define the optimal ABB support to maintain your
robot working.
Contact your local ABB Customer Service to get more information.
98 Product manual - IRB 460
3HAC039842-001 Revision: P
© Copyright 2012-2018 ABB. All rights reserved.
3 Maintenance
3.2.1 Specification of maintenance intervals
To Next Page
Loading...
Need help?
General