2 Installation and commissioning
2.6.1. Lifting the robot with fork lift
3HAC026876-001 Revision: F64
© Copyright 2007-2010 ABB. All rights reserved.
2.6 On-site installation
2.6.1. Lifting the robot with fork lift
General
The robot may be moved using a fork lift, provided that available special aids are used.
This section describes how to attach the fork lift equipment to the robot.
Fork lift device set
The fork lift device set is fitted to the robot as shown in the figure below.
xx0600002910
Required equipment
A Fork lift pocket
B Attachment screw M20x60 quality 8.8 (2 pcs x 4)
Equipment Art. no. Note
Fork lift device set 3HAC025040-003
Standard toolkit - The content is defined in the section
Standard toolkit on page 409.
Continues on next page