Agilent Technologies Agilent 8163A User Manual

AC Line Power Supply Requirements Installation and Maintenance
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 293
Figure 180 Agilent 8166A/B Lightwave Multichannel System Power Key
The type of power cable shipped with each instrument depends on the
country of destination.
If you need to turn off the power, unplug the instrument at the mains
or remove the power cable connector from the appliance coupler at
the rear of the instrument. For this reason, the power cable
connection should be easily accessible - allowing you to turn off the
power quickly. If the instrument is in a cabinet, it must be
disconnected from the line power by the system’s line power
switch.
CAUTION
Please note that the power key on the front panel of the
Agilent 8164A/B Lightwave Measurement System does not stop
the flow of power to the instrument. The power key allows you to
switch between stand-by mode and power-on mode.
CAUTION
If you need to turn off the power, unplug the instrument at the mains
or remove the power cable connector from the appliance coupler at
the rear of the instrument. For this reason, the power cable
connection should be easily accessible - allowing you to turn off the
power quickly. If the instrument is in a cabinet, it must be
disconnected from the line power by the system’s line power
switch.
CAUTION
You only need to use the line power cable to connect to the AC adapter.
NOTE

Agilent Technologies Agilent 8163A Specifications

General

Brand	Agilent Technologies
Model	Agilent 8163A
Category	Multimeter
Language	English