Rockwell Automation Publication 2711R-UM001E-EN-E - January 2017 145
Appendix
F
Using PanelView 800 Terminals with
CompactLogix 5370 Controllers
This chapter provides an example of how to use a CompactLogix 5370 controller
in your PanelView 800 application. It includes information on how to address the
different data types between PanelView 800 terminals and CompactLogix 5370
controllers. Examples of how to map them to tags are also provided.
To use a CompactLogix 5370 controller in your PanelView 800 application, there
are four simple steps to do as follows:
1. Add the CompactLogix 5370 controller to the application.
2. Map the PanelView 800 terminal tags with the CompactLogix 5370
controller tags.
3. Validate the application in PVc DesignStation in Connected Components
Workbench software.
4. Download the application to a PanelView 800 terminal.
To Next Page
Loading...
Need help?
General
