Allen-Bradley PowerFlex 40 User Manual

118 Publication IASIMP-QS001C-EN-P - October 2009
Chapter 11 Add Distributed I/O Modules to the Project
Edit the DeviceNet Adapter Parameters
DeviceNet only
1. Launch RSNetWorx for DeviceNet.
2. Open the main DeviceNet
configuration file you saved and
recorded on the Network Worksheet
.
3. Click Who Active to go online.
4. If prompted, click OK.
5. Right-click the adapter and select
Properties.
6. Select the Parameters tab.
7. Click Upload.

Allen-Bradley PowerFlex 40 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 40
Category	Controller
Language	English