Allen-Bradley PowerFlex 40 User Manual

189Publication IASIMP-QS001C-EN-P - October 2009 189
Chapter 14
Create a PanelView Plus Application
In Chapter 10, you used ladder logic in the RSLogix 5000 programming software to create a
push button that controlled an LED indicator on a digital output module. In this chapter you
create a push button and a multi-state indicator in FactoryTalkView software that use that
ladder logic. You also transfer the application to the PanelView Plus so you can test
communication with the controller.
Before You Begin
• Prepare the PanelView Plus, see Chapter 6
• Create a project in RSLogix 5000 programming software, see Chapter 10
What You Need
• FactoryTalkView Machine Edition software

Allen-Bradley PowerFlex 40 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 40
Category	Controller
Language	English