Allen-Bradley PowerFlex 40 User Manual

143Publication IASIMP-QS001C-EN-P - October 2009 143
Chapter 12
Create a PowerFlex 70 Application
In this chapter, you configure a PowerFlex 70 drive and add the drive to the RSLogix 5000
project created in Chapter 10
. You also download the project to the controller so you can test
communication with the drive.
Before You Begin
• Prepare the PowerFlex 70 drive and network adapter, see Chapter 4
• Create a project using RSLogix 5000 programming software, see Chapter 10
What You Need
• For an EtherNet/IP network, no additional software is needed
• For a ControlNet network, RSNetWorx for ControlNet software
• For a DeviceNet network, RSNetWorx for DeviceNet software

Allen-Bradley PowerFlex 40 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 40
Category	Controller
Language	English