Allen-Bradley PowerFlex 40 User Manual

12 Publication IASIMP-QS001C-EN-P - October 2009
Required Software
To complete examples in this quick start, you need one of the following
software packages.
If you do not use the RSLogix 5000 programming software packages
recommended, you may need to purchase additional software to complete the
examples in this quick start.
You will need to install the following software, included with the RSLogix
5000 programming software packages listed:
• BootP-DHCP server
• ControlFlash software
• DeviceNet Tag Generator
• RSLinx software, version 2.54 or later
• RSLogix 5000 programming software, version 17 or later
• RSNetWorx software (version specific to your network option)
If you plan to complete the PanelView Plus examples within this quick start,
you will also need FactoryTalkView Machine Edition software.
If using network Use RSLogix 5000 programming
software edition
EtherNet/IP
(Options 1, 2, and 3)
•Full
•Standard
•Professional
ControlNet
(Option 2)
•Standard
•Professional
DeviceNet
(Option 3)
•Standard
•Professional

Allen-Bradley PowerFlex 40 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex 40
Category	Controller
Language	English