Avaya ESS User Manual

Maintenance
158 Avaya Enterprise Survivable Servers (ESS) Users Guide
Figure 48: status ess port-networks
status ess port-networks field descriptions
status ess port-networks
Cluster ID 1 ESS PORT NETWORK INFORMATION
Port IPSI Pri/ Pri/ Cntl Connected
Com Intf Intf Ntwk Gtway Sec Sec Clus Clus(ter)
PN Num Loc Type Ste Loc Loc State ID IDs
1 1 1B01 IPSI up 1B01 1AXX standby 1 1 44 64 13 9 200 100 500
1B01 actv-aa 1 1 44 64 13 9 200 100 500
2 1 2AXX IPSI up 2AXX 2AXX actv-aa 1 1 44 64 13 9 200 100 500
2B01 standby 1 1 44 64 13 9 200 100 500
3 2 3AXX IPSI up 3AXX 3AXX actv-aa 1 1 44 64 13 100 500 850 9
3B01 standby 1 1 44 64 13 100 500 850 9
4 2 4A01 IPSI up 4A01 4A01 actv-aa 1 1 44 64 13 100 500 850 9
4B01 standby 1 1 44 64 13 100 500 850 9
5 1 5A01 EI up 3AXX
Command successfully completed
Command:
status ess port-networks field descriptions
Field Description
Cluster ID
(title line)
Cluster IDentifier (1 - 999). The cluster identifier of the server on which
status ess port-networks was run.
In a duplex server pair (
S8700 | 8710), both the active and the standby server
should have the same cluster identifier. Each server initially learns its own
cluster ID from its license file (where it is called the Module IDentifier or
MID). After save translations is executed, the cluster identifier is
saved in translations. However, the cluster identifier is always overridden by
the license file as long as the license file is present and readable. The
example above status ess port-networks
on page 158 shows a cluster
identifier of one (1).
PN The number that identifies the Port Network (PN). This is the same number
that identifies the Port Network in the list cabinet command.
1 of 4

Avaya ESS Specifications

General

Brand	Avaya
Model	ESS
Category	Server
Language	English