ServSwitch™ DKM
64
6.1.14 Saving Configurations into File
Please select the option “Save as” in the “Configuration” menu by using the cursor buttons
and confirm with <RETURN>.
The “Save as” mask is displayed full screen.
In this menu, you can save your current switch configuration to file. This does not replace
saving the configuration within the switch.
The current configuration together with name and detailed information is shown as „Active“.
This configuration can be stored either to the “Default” configuration file or to up to eight
further configuration files.
The file for the configuration to be saved to is selected by cursor buttons or mouse and must
be confirmed by <RETURN> or double click. The configuration previously stored in the
selected file is deleted by this operation and cannot be recovered.
For saving configurations externally, please refer to External Saving of Configuration Files
on page 76.
To Next Page
Loading...
Need help?
General