SERVSWITCH™ DKM CONFIGURATION
71
6.4.5 Configuration of Network Parameters
Please select the option “Network” in the “Configuration Mask” by using the cursor buttons
and confirm with <RETURN>.
The “Configuration Network” mask is displayed full screen.
In this menu, you can define the parameters for the ServSwitch™ DKM IP network interface.
The functionality of the network interface is described in Appendix D: Network Interface
(p. 138).
Configuration Network
DHCP : _Y_
Address: 0__.0__.0__.0__
Subnet : 0__.0__.0__.0__
Gateway: 0__.0__.0__.0__
Cancel Save
ServSwitch DKM
Configuration Options:
Field Type Description
DHCP Y/N
Select dynamic network configuration (‚Y’ or ‚N’)
IP Address 4x BYTE
Enter IP Address (format ‚192.168.1.1’) without DHCP
Subnet Mask 4x BYTE
Enter Subnet Mask (format ‚255.255.255.0’) without
DHCP
Gateway 4x BYTE
Enter Gateway Adresse (format ‚192.168.2.1’ ) without
DHCP
Please contact your System administrator before changing
these data. Otherwise, connection to the network might
cause undesired results or malfunctions.
To Next Page
Loading...
Need help?
General