APPENDIX I: SERVSWITCH™ MEDIA EXTENDER
157
I.3. Diagnostics of ServSwitch™- Media/ KVM
Each ServSwitch™- Extender is fitted with four indicator LEDs: Power, Video OK, Data
Error, Link Status: The Power LEDs are next to the power socket.
The location of the LEDs is shown below:
Diagnostic- LEDs at ServSwitch™- KVM/ Media Extender
LED Appearance Diagnostics
Power LED
(Red LED)
Off
On
Device not ready
Device ready
Video Okay
(Green LED)
Off
On
No or invalid video signal detected
Device ready
Link Status
(Green LED)
blinking
On
No CATx- connection
Device ready
Data Error
(Green LED)
Off
blinking / On
Device ready
Errors through data transmission over CATx- cable
(cable too long, too high attenuation or too much
EMI interferences)
Diagnostic LED
Power
Diagnostic LED
Video OK
Diagnostic LED
Data Error
Diagnostic LED
Link Status
To Next Page
Loading...
Need help?
General