EasyManuals Logo
Home>Brother>Printer>ADS-1300

Brother ADS-1300 User Manual

Brother ADS-1300
297 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #217 background imageLoading...
Page #217 background image
Home > Troubleshooting > Error and Maintenance Messages > Error Messages When Using the Brother
Web Connect Feature
Error Messages When Using the Brother Web Connect Feature
Related Models: ADS-1800W
Your Brother machine displays an error message if an error occurs. The most common error messages are
shown in the chart.
You can correct most errors yourself. If you need more tips, go to your model's FAQs & Troubleshooting page
at support.brother.com/faqs.
Connection Error
Error Messages
Cause Action
Connection Error 02
The machine is not connected to a
network.
Verify that the network connection
is good.
If the Web or Apps option was
pressed soon after the machine
was turned on, the network
connection may not have been
established yet. Wait and try
again.
Connection Error 03
Network or server settings are
incorrect.
There is a problem with the
network or server.
Confirm that network settings are
correct, or wait and try again later.
If the Web or Apps option was
pressed soon after the machine
was turned on, the network
connection may not have been
established yet. Wait and try
again.
Connection Error 07
Date and time settings are incorrect. Set the date and time correctly. Note
that if the machine's power cord is
disconnected, the date and time
settings may have reset to factory
settings.
Authentication Error
Error Messages
Cause Action
Authentication Error 01
The PIN you entered to access the
account is incorrect. The PIN is the
four-digit number that was entered
when registering the account to the
machine.
Enter the correct PIN.
Authentication Error 02
The temporary ID that was entered is
incorrect.
Enter the correct temporary ID.
The temporary ID that was entered
has expired. A temporary ID is valid
for 24 hours.
Apply for Brother Web Connect
access again and receive a new
temporary ID, and then use the new
ID to register the account to the
machine.
Authentication Error 03
The name you entered as the display
name has already been registered to
another service user.
Enter a different display name.
212

Table of Contents

Other manuals for Brother ADS-1300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother ADS-1300 and is the answer not in the manual?

Brother ADS-1300 Specifications

General IconGeneral
BrandBrother
ModelADS-1300
CategoryPrinter
LanguageEnglish

Related product manuals