Home > Machine Settings > Change Machine Settings from the Control Panel > Change the General
Settings from the Control Panel
Change the General Settings from the Control Panel
Related Models: ADS-1800W
Purpose Operation Description
Adjust the LCD Backlight Brightness
Settings > General Setup >
LCD Settings > Backlight
Adjust the brightness of the LCD
backlight.
Change How Long the LCD Backlight
Stays On
Settings > General Setup >
LCD Settings > Dim Timer
Set how long the LCD backlight stays
on.
Set the Home Screen
Settings > General Setup >
Screen Settings > Home Screen
Set the Home screen to Scan 1-4,
Shortcut 1-5, or Auto Start Scan.
When the machine is idle or you
press
, the LCD will return to the
screen you have set.
Set Sleep Mode Countdown
Settings > General Setup >
Ecology > Sleep Time
Set how long the machine must be
idle before it goes into Sleep Mode
(5-90 minutes). The Sleep Mode
setting can reduce power
consumption. When the machine is in
Sleep Mode, it acts as though it is
turned off.
The timer will restart if any operation
is carried out on the machine.
The machine will not enter
Sleep Mode in the following
situations:
• A USB flash drive is
inserted into the machine.
• A machine error has
occurred.
Set the Machine to Power Off
Automatically
Settings > General Setup >
Ecology > Auto Power Off
Select how long the machine must
wait before it automatically turns itself
off after entering Sleep Mode. The
Auto Power Off feature can save
power consumption. When this
feature is set to Off, you must power
off the machine manually. To turn the
machine on after the Auto Power Off
feature has turned it Off, press .
The timer will restart if you press any
buttons or touchscreen.
Auto Power Off will be
activated when all of these
conditions are met:
• Auto Power Off setting is
not set to Off.
• The machine has been in
Sleep Mode for more than
the preset period.
261
To Next Page
Loading...
Need help?
General