Home > Routine Maintenance > Replace Supplies > Replace the Pick Up Roller
Replace the Pick Up Roller
Your machine is equipped with a scan counter that automatically counts how many times the machine has
scanned. After approximately 100,000 scans, you may have to replace the Pick Up Roller.
1. Open the Top Cover (1) and the Front Cover (2).
2. Pinch the Pick Up Roller Cover (1) and then pull the cover up and remove.
3. Slide the Pick Up Roller(1) to the right edge.
4. Pinch and pull the Pick Up Roller out of the machine.
5. Place a new Pick Up Roller into the machine.
248
To Next Page
Loading...
Need help?
General