Home > Paper Handling > Load Documents > Load Documents Longer than Standard Size
Load Documents Longer than Standard Size
Make sure documents with ink or correction fluid are completely dry.
1. Gently adjust the Paper Guides (1) to fit the width of your document.
2. Slide the Feed Selector to the left and confirm that it is in ADF Mode. Place your document, face down, top
edge first in the ADF between the Paper Guides until you feel it touch the inside of the machine. Feed thin
pages slowly and carefully to keep the edge from folding.
• Load only one document at a time.
• Support the document with your hand if the document is longer than the extended ADF.
• Long paper is available for scanning at resolutions below 300 x 300 dpi.
• Long paper is not available for 2-sided scanning.
Related Information
• Load Documents
37
To Next Page
Loading...
Need help?
General