Home > Scan > Scan from Your Computer (Windows
®
) > Scan Using Nuance
™
PaperPort
™
14 or Other
Windows
®
Applications
Scan Using Nuance
™
PaperPort
™
14 or Other Windows
®
Applications
You can use the Nuance
™
PaperPort
™
14 application for scanning.
• To download the Nuance
™
PaperPort
™
14 application, click (Brother Utilities), select Do More in the
left navigation bar, and then click PaperPort.
• Nuance
™
PaperPort
™
14 supports Windows Vista
®
(SP2 or greater), Windows
®
7, Windows
®
8,
Windows
®
8.1, Windows
®
10 Home, Windows
®
10 Pro, Windows
®
10 Education and Windows
®
10
Enterprise.
• For detailed instructions on using each application, click the application's Help menu, and then click
Getting Started Guide in the Help ribbon.
The instructions for scanning in these steps are for PaperPort
™
14. For other Windows
®
applications, the
steps will be similar. PaperPort
™
14 supports both TWAIN and WIA drivers; the TWAIN driver
(recommended) is used in these steps.
• Depending on the model of your machine, Nuance
™
PaperPort
™
14 may not be included. If it is not included,
you can use other software applications that support scanning.
1. Load your document.
2. Start PaperPort
™
14.
Do one of the following:
• Windows Vista
®
and Windows
®
7
Using your computer, click
(Start) > All Programs > Nuance PaperPort 14 > PaperPort.
• Windows
®
8
Click (PaperPort).
• Windows
®
10
Click
> All apps > Nuance PaperPort 14 > PaperPort.
3. Click the Desktop menu, and then click Scan Settings in the Desktop ribbon.
The Scan or Get Photo panel appears on the left side of the screen.
4. Click Select.
5. From the available Scanners list, select TWAIN: TW-Brother MFC-XXXX or TWAIN: TW-Brother MFC-
XXXX LAN (where MFC-XXXX is the model name of your machine). To use the WIA driver, select the Brother
driver that has "WIA" as the prefix.
6. Select the Display scanner dialog box check box in the Scan or Get Photo panel.
7. Click Scan.
The Scanner Setup dialog box appears.
218
To Next Page
Loading...
Need help?
General
