Printing
6-4
Checking and Deleting Jobs
System monitor enables you to monitor the status of the print jobs currently being
processed.
Make sure that the Processing/Data indicator is turned on. When the Processing/Data indicator is turned off, all
print jobs are erased from the memory.
Checking and Deleting Print Jobs
1 Press [System Monitor] repeatedly to select <PRINT STATUS>, then press [OK].
2 Press [ ] or [ ] to scroll through the job list, and check the status of the
print jobs.
If you want to delete the job, go to step 3. Otherwise, press [Stop/Reset] to return to the standby mode.
To Next Page
Loading...
Need help?
General
