Scanning
7-2
Scanning to a Computer
Follow this procedure to scan a document to your computer.
Make sure that the scanner driver is installed. To check if the driver is installed, see
“Installing/Uninstalling Software,” in the Starter Guide.
For details on scanner driver settings, see the Scanner Driver Guide (in the User
Software CD).
Set Documents Enter the Scan Mode
Place the first page on the platen
glass if you are not using the ADF.
For documents you can fax, see “Document
Requirements,” on p. 2-2.
Press [SCAN].
The SCAN indicator lights up and the machine enters scan
standby mode.
To Next Page
Loading...
