Printing procedure
Printing from Mac OS X
Print from the application menu after registering the printer .
Important
• W e recommend exiting unnecessary applications before printing. Running several applications while
printing may interrupt the transfer of print data and af fect printing quality .
Registering the printer
Before printing, you must register the printer in Printer Setup Utility (or Print Center ).
For instructions on registering the printer , see “Conguring the Printer Driver Destination (Macintosh)”.
(→P .510)
Important
• During this setup process, the printer will not be listed among available printers if it is of f or disconnected.
• By factory default, the AppleT alk protocol is disabled on the printer . Y ou must enable the AppleT alk
protocol before using the printer in an AppleT alk network. For instructions on activating AppleT alk
protocol, see “Conguring the Destination for AppleT alk Networks (Macintosh)”. (→P .512)
Note
• For Canon IP(iPF) connections, enter the printer ’ s IP address.
Printing from the application software
1. In the application software, select Print from the File menu to display the dialog box for printing
conditions.
Note
• This dialog box includes basic printing options and enables you to choose the printer , specify the
range of pages, number of copies, and so on.
2. Select the printer in the Printer list.
Basic Printing W orkow 101
To Next Page
Loading...
Need help?
General