Messages regarding paper
The roll is empty .
Cause Corrective Action
There is no more paper left on the roll. Follow the steps below to replace the used roll with a
new roll of the same type and size.
1. Remove the roll.
( → P .124)
( → P .125)
( → P .126)
2. Load the new roll.
( → P .1 19)
( → P .121)
( → P .122)
3. If no barcode was printed on the roll, specify the
paper type.
( → P .1 17)
4. If no barcode was printed on the roll, specify the
paper length.
( → P .1 18)
*If this message is displayed, you can resume the print job.
Roll feed unit err
Cause Corrective Action
T urn of f the printer , remove the Roll Feed Unit
momentarily , and then reinstall it.
( → P .146)
( → P .147)
The Roll Feed Unit is not working.
If the message is still displayed after you do this,
contact your Canon dealer for assistance.
No Roll Feed Unit.
Cause Corrective Action
The printer has received a print job that species
rolls, but the Roll Feed Unit is not installed.
Install the Roll Feed Unit and resend the print job.
( → P .147)
Sheet printing is selected.
Cause Corrective Action
Load a sheet and try printing again.Y ou have attempted to print a test print sheet or other
printer status information on a sheet, but no sheet
is loaded.
T o print on a roll instead, hold the Stop button for
more than a second to cancel printing, load a roll,
and then print. ( → P .93)
692 Error Message
To Next Page
Loading...
Need help?
General