Messages regarding paper
Manual printing is selected, but a roll is loaded.
Cause Corrective Action
Hold down the Stop button for a second or more to
cancel printing.
If there is a printed document in the output tray , select
Paper Cutting in the printer menu and cut the roll at
the desired position.
( → P .135)
Load paper of the type and size you have specied in
the printer driver and try printing again.
( → P .98)
A print job for manually printing on sheets was sent
when a roll is loaded.
Hold down the Stop button for a second or more to
cancel printing. Change the printer driver settings to
match the roll already loaded, and then try printing
again.
W rong paper feed slot for this paper type.
Cause Corrective Action
The Paper Feed Slot where paper is loaded does not
match the Paper Feed Slot specied as the paper
source.
T ry printing again after changing the settings in the
printer driver so that the Paper Feed Slot where paper
is loaded matches the Paper Feed Slot specied as
the paper source. ( → P .98)
Paper jam.
Cause Corrective Action
A paper jam occurred in the printer during printing. Press the Load/Eject button and remove the jammed
paper .
( → P .127)
( → P .159)
Y ou have loaded and printed on a roll when sheets
are selected as the paper source on the Control
Panel .
Press the Load/Eject button, remove the roll, and
load a sheet. Otherwise, select the roll as the media
source on the Control Panel and reload the roll.
*If this message is displayed, you can resume the print job.
Error Message 693
To Next Page
Loading...
Need help?
General